DCS1000-NS is mainly belt/shake filler, frame, weighing platform, hanging bag device, bag clamping device, lifting platform, conveyor, electrical control system, pneumatic control system, etc. When the packaging system works, in addition to the manually place bag, the packaging process is automatically completed by the PLC program control, and the procedures of bag clamping, blanking, metering, loose bag, conveying, etc. are completed in turn; The packaging system has the characteristics of accurate counting, simple operation, low noise, less dust, compact structure, convenient installation, safety and reliability, and safe interlocking between the workstations.
|Filler||1 Belt filler 2 Shake filler|
|Count||Weigh as hanging|
|Control system||Functions such as automatic drop correction, error alarm and fault self-diagnosis, Equipped with a communication interface, easy to connect, network, can be the packaging process at all times monitored and networked management.|
|Scope of material：10mm-80mm lump materials|
|Scope of application：Chemical, pharmaceutical, feed, fertilizer, mineral powder, electric power, coal, metallurgy, cement, biological engineering, etc|
|Pressure air||0.6-0.8MPa. 5-10 m3/h|
|Blowing rat||1000 -4000m3/h|
|Environment：Temp -10℃-50℃. Humidity＜80%|
|Convey option||1. No 2. Chain conveyor 3. Chain roller conveyo 4. Trolley….|
|Protection||1. Explosion-proof 2. No explosion-proof|
|Dust elimination||1. Dust elimination 2. No|
|Material||1. Steel 2. stainless steel|
|Shake||1. Up and down(standard) 2. bottom shake|
Manually hang the sling of the packaging bag on the hook - manually put the feeding port of the packaging bag on the unloading barrel of the bag clamper and toggle the proximity switch of the bag clamp to automatically clamp the bag ----- the lifting platform automatically rises - press Press the start button, the feeding valve is automatically fully opened, and the feeding valve is automatically fast-feeding---- (the platform can be automatically controlled to lower the vibrating material bag according to the needs during the feeding process) ---- When the maximum feeding set value is reached, the feeding valve will automatically turn to Small opening—feeding stops after full weighing to complete the measuring process—the lifting platform descends—the bag clamper is released—the hook is released and reset—repeat the above cycle.
Main technical features of the equipment
1.It is suitable for quantitative filling of bulk materials, with fast packaging speed and high packaging precision.
2.Pneumatic hook and pneumatic bag holder are fixed on the lifting platform and lift together with the lifting platform. The lifting guide of the lifting platform is realized by the scissor guide mechanism. The lifting platform, the bag holder, the hook, the lifting cylinder and the scissor guiding mechanism are all fixed on the weighing platform as part of the scale body, and these components constitute the lifting weighing platform. The four cylinders are equipped with speed-adjusting gas pipe joints, which can adjust the running speed of each cylinder to adjust the synchronization of the four cylinders.
The service life of the whole machine can reach 50,000 times.
3.It has the functions of weight accumulation display and automatic tare, automatic zero calibration, automatic drop correction, out-of-tolerance alarm and fault self-diagnosis. The instrument is equipped with a communication interface, which is convenient for online and networking, and can monitor and manage the weight from time to time.